5M Extension Supply Cable for Electric Linear Actuators Type A, B or J with Hall Effect Sensor (Model 0043047)

5M Extension Supply Cable for Electric Linear Actuators Type A, B or J with Hall Effect Sensor (Model 0043047)The six core power cable of the electric linear actuator type A, B or J with hall effect sensor is only 1. 5 meters. If you need a longer power cable, please purchase this extension cable. This extension cable is 5 meters long, it has a female plug and a male socket, you can use it to extend the distance between the linear actuators and synchronization controller. If you want to extend the distance between 1 linear actuator and synchronization

AC Motor rotates in positive direction

can be used for 12 months) Standby Current 4uA Operating Current 14mA Operating Frequency 433Mhz Transmitting Distance 500m / 1500ft (theoretically) If you stretches the telescopic antenna

DC motor or linear actuator stops

5~3A at 24V Recommended Power Supply 12V/20A or 24V/10A Shaft Diameter 20mm [0

Reset operation: Press and hold the <R> button of the control handle or the <Reset> button on the controller

Product Specifications Parameter Value Working Voltage DC 12V or DC 24V (24V most commonly used) Stroke Range 6 inches or 150 mm Optional Speed (No-load) 6±1mm/s

then press the button K2 or K3 to adjust this delay time B

) Max Load Capacity 188 N / 19 kg / 42 lbs at 5mm/s (Linear actuator can get maximum load capacity when it operates in the vertical direction

Operation for linear actuator: Push the switch to the position "ON"

resulting in a retraction length of 435 mm

we also do not accept exchanges

This receiver is an electric device with 4 channels AC power outputs